Where should embed plates be located within a tilt-up panel?

• A. Exposed on the surface of the concrete
• B. Fully embedded in the core
• C. Outside the panel
• D. On the top edge

Answer: (A)

In tilt-up construction, the plates used for lifting are acting as the actual lifting anchors for raising the panel. They must be accessible to the rigging and crane during the lift, so they are placed where you can attach hardware without obstruction and without having to reach into the panel.

Locating embed plates exposed on the surface of the concrete ensures they can be engaged by the lifting equipment right at the moment of lift and later remain accessible for any required connections or inspections. If the plates were fully embedded in the core, there would be no way to attach the lifting hardware. If they were outside the panel or only on the top edge, you’d run into exposure, damage, or insufficient secure attachment, which can compromise safety and the lift. Exposed on the surface provides the practical, safe accessibility needed for the lifting operation.